产物相册：
特色申明（Characteristic description)
这款机器首要针对汽车行业、传感器行业，电力行业，电控柜，电池盒的线，可把整卷电线按照所须要的长度、剥头停止堵截剥皮，不伤到外被及导体，滚轮送线精度准无力，从而大大进步了效力。This machine is mainly for the automobile industry, the sensor industry, the electric power industry, the electric control cabinet, the battery box's line, may the entire coil electric wire according to needs the length, the peeling head carries on the cutting off peeling, does not hurt the outside to be and the conductor, the roller sends the line the precision to be accurate powerful, thus greatly enhanced the efficiency.
装备带有进级功效，可加装：喷码、收线、中剥、表里剥等功效；可扩大剥双层圆护套线，直径8mm之内，只要改换刀架；皮带和轮子送线，可按照详细的请求切换。
The equipment has the function of upgrading and can be equipped with functions such as: code spraying, wire receiving and medium stripping;Expandable double layer circular sheath line, within 8mm in diameter, only need to replace the tool holder;Belt and wheel wire feed can be switched according to specific requirements.
机型规格Model specification
|
型号Model |
HC-608E3 |
|
形状尺寸Dimension |
650*600*475mm |
|
分量Weight |
90KG |
|
显现体例Display |
触屏操纵，中文显现Chinese/English display，Touch screen |
|
电源Power |
220V／ 850 W |
|
切割长度(mm)Cutting length(mm) |
0.5mm-99999.99mm，中间留皮大于 55 MM 0.5mm-99999.99mm，Leaving middle skin mor than 55 mm |
|
前端剥皮长度Frond end stripping length |
护套线MAX 300mm 电缆线全脱MAX 20mm Sheath cable wire MAX 300mm ;Electric cable wire MAX 20mm |
|
前端剥皮长度（双层护套）Frond end stripping length（Double sheathed wire）
|
外护套25mm-300mm，芯线1-15mm Outer wire25mm-300mm，Inner wire 1-15mm |
|
后端剥皮长度Rear end stripping length |
护套线MAX 140 mm 电缆线全脱MAX 50 mm Sheath cable wire MAX 140 mm ;Electric cable wireMAX 50 mm |
|
后端剥皮长度(双层护套）Rear end stripping length（Double sheathed wire） |
外护套25mm-140mm，芯线1-15mm Outer wire 25mm-140mm，Inner wire 1-15mm |
|
剥线规模Stripping range |
最大护套线外径可到13mm，BVR35平方 Max sheath wire diameter is up to13mm，BVR 35mm2 |
|
导线范例Wire material |
护套线、PVC、铁氟龙线、玻璃线、德律风线 Multicore sheathing wire、PVC、flat modular phone cable、telflon、fiberglass |
|
切割公役tolerance |
Within 0.002 x Lmm ※ L=cutting length |
|
导管直径Conduit diameter |
1-14mm |
|
驱动体例Driving way |
滚轮送线，八轮驱动，,自力驱动盒驱动 Eight-wheel drive,independent drive box driver |
|
出产率（次／分）productivity（pcs／h） |
约 100mm/1500 PCS/h 1000mm/1100 PCS/h about 100mm/1500 PCS/h 1000mm/1100 PCS/h |
